1.
Rubber Seal Radiator Gasket (click
here for picture). We believe this seal is
only used on the radiator late in the 1988 model year.
We need to hear from 1988 Fiero owners
to confirm if this radiator seal is or is not on
your Fiero. Please provide the last six digits of
your VIN# when responding. -------------------------------------------------------------------------------------
2. We are looking
to add the torque rating for the various 3-speed
automatic, 4-speed manual, and 5-speed manual
transmission options available in the Fiero.
Do you have
this data available to share?
-------------------------------------------------------------------------------------
3. From our research it appears
that the automatic transmission shifter boots are
mounted to the center console in one or two
different ways. Either they have an elastic band
or with a plastic brace. We are looking for two
things: A. We need
a high-resolution image(s) of each of these
different mounting techniques.
B.
Please provide your Fiero(s) model year and body
style and indicate which mounting style you have
- elastic band or plastic brace so we can verify
when the different techniques were utilized.
-------------------------------------------------------------------------------------
4. We are
looking to add a listing of weights for the various
stock Fiero wheels for all model years. We need
the weights for the wheels only (not with the tires
mounted on them) for the following wheel styles
(you can find images of these wheels in the Image
Gallery in your Enthusiasts Guide):
A. 13" Steel Rally
Wheel offered both with and without the trim ring
B. 14"
HI-Tech Turbo aluminum wheel
C. 13" Turbo
Finned aluminum wheel
D. 15" Gray
Diamond Spoke aluminum wheel ('86-'87 GT)
E. 15" Black
(or Gold) Diamond Spoke aluminum wheel - Front ('88
GT)
F. 15" Black
(or Gold) Diamond Spoke aluminum wheel - Rear ('88
GT)
-------------------------------------------------------------------------------------
5. The ’85 V6 Fieros included
a trunk mounted cooling fan that blew cool air on
the alternator and the ignition coil.
Please take a
high-resolution image of this cooling fan motor
as it is mounted in the trunk as well as the two
cooling tubes, which are mounted in the engine
compartment to add to our Enthusiasts Guide.
-------------------------------------------------------------------------------------
6. We are looking to compare the
brands and tire sizes for the spare tire located in
the front compartment in all Fiero model years –
1984 – 1988.
If your
spare tire is original
to your Fiero, please
submit the tire size, tire brand, model year and
body style
of your Fiero to us for review of this
information.
-------------------------------------------------------------------------------------
7. The luggage rack bar that spans
the width of the Fiero’s trunk has a different
length when it was installed on the Fastback GT
body style.
We are
looking for the dimensions of
both the Notchback
body style’s luggage rack bar length as well as the
Fastback
body style’s luggage rack bar length.
Please indicate how many support bars you
have
mounted to your deck lid (please identify
if your Fiero is a notchback or a fastback).
-------------------------------------------------------------------------------------
8.
The latch
that holds down the sunroof has two different styles
marked Sunroof Latch – With (click
here for picture) and Sunroof Latch – Without (click
here for picture). We believe that the
sunroof latch without the ledge was offered in the
1984-1986 Fieros. The sunroof latch
with the ledge appears to only be offered with the
sunroof sunshade (1987 & 1988).
We need to hear from Fiero
owners of each model year, 1984 through 1988 to
verify which latch
was used when.
If your
sunroof is original to your Fiero, please provide us
with your Fiero's model year
and body style
(Coupe, SE, GT, etc.) while indicating if your
sunroof latch is with
or without the ledge.
-------------------------------------------------------------------------------------
9. The throttle body warm air
intake uses a corrugated pipe for the 1984 model
year. In 1985 and later years a formed
steel pipe was used for the 4-cylinder models.
We are
looking for images of both the 1984 corrugated pipe
as well as the
1985 formed
steel pipe. Please submit a high-resolution image of
this piping to be included in the Enthusiasts
Guide.
-------------------------------------------------------------------------------------
10. In 1984, the sunroof wind
deflector was originally molded in smooth, black
plastic. As a running change, the wind deflector
was changed to a textured, black plastic.
If you have a 1984 Fiero with
the original smooth, black plastic wind
deflector, please submit the last six digits of your
VIN # along with a high-resolution image of the
smooth, black plastic wind deflector to be included
in the Enthusiasts Guide.
-------------------------------------------------------------------------------------
11. The 1986 and 1987 Fiero SE and
GT offered as an option the Camel colored leather
and suede seats.
Please submit a high-resolution image of this seat
in a similar perspective as the other seat images
in your Enthusiasts Guide’s Image Gallery.
-------------------------------------------------------------------------------------
12. The
black trim around the triangular sail panel windows
for 1984 Fieros is different than the 1985 and later
years. Please
submit a high-resolution image of this trim from
your 1984 Fiero from a similar perspective as the
image marked Sail Panel Trim (click
here for picture)
|
|